White-River-v7

WhiteRiver.com l 800.558.0119 ©White River Hardwoods-Woodworks, Inc. 1989-2015 188 SOLID WOOD OR FLEXIBLE RESINS • MADE TO ORDER CURVED MOULDINGS INFORMATION l • Solid wood curved mouldings can be manufactured for most of our profiles from in-stock hardwood. Please call your White River Sales Professionals for more information. • Resin mouldings can be manufactured for crown, case, base, chairrail and panel mouldings. Resin mouldings can be painted or stained and will offer a cost savings over solid wood. Many mouldings on curved wall applications are only available in flexible resins. • The maximum length of Resins is 12’, minimum length is 5’ and all resins are sold by the whole foot (no half feet). • Resins can be used for interior and exterior work. When used as exterior trim, opulent applications can be applied with complete weatherability. • Original resin moulds are cast from Poplar or Maple. See Price List for those available in Red Oak. Customer is responsible for mould charges if a specific profile has not been cast by White River. INFORMATION TO ORDER CURVED MOULDINGS l CASINGS l Solid Wood or Resins • True half-circle - inside radius or diameter • Arch (eyebrow or segment) - inside rise and span or template • Ellipse - template only • Profile number, species, lengths, and count BACKBANDS l Solid Wood or Resins • Radius on main casing that backband is to attach to • Type of curve (arch, ellipse, or half-circle) • Profile number, species, lengths, and count BASEBOARDS l Resins only • If baseboards are being used in baseboard applications or as part of a crown application on a wall, then baseboards do not need to be pre-cast to a radius. They are ordered as straight pieces and only total lineal footage is needed. • If baseboards are used as casing or as part of a crown detail where they lay out on the ceiling (not on the wall) then the information under casing will be needed. PANEL MOULDS l Solid Wood or Resins • Solid wood panel mouldings can be manufactured for flat wall arch panels, clipped corners and paneled wall applications. • If the panel mould is used with curved wall application, then straight resin moulding should be ordered. FINISHING RESIN MOULDINGS l Our resin mouldings are easy to install and finish. They are manufactured with a latex-based primer coat. This helps the finish to adhere to the profile. There are numerous finishes on the market, and many ways to apply them. There are also climatic reasons that can alter how finishes are applied and dry. Most of the time, resins can be finished with the same process as the finishing of hardwood mouldings. Please test a small sample to see that the finishes you are applying adhere. CROWNS l Solid Wood or Resins • Is wall concave or convex? • Radius of wall • Piece count and length of moulding needed (add for waste) • Profile number, species, lengths, and count LINEAL MOULDS, FRIEZES AND CHAIRRAILS l Resins only • If these are used horizontally on curved walls then they will not need to be pre-cast. Only lineal footage is needed. To use as Casing, refer to Casing information. 48” inside diameter 24” inside radius 50” inside span or width paper or cardboard template needed HALF CIRCLE ARCH or EYEBROW ELLIPTICAL GOTHIC ARCH TUDOR ARCH paper or cardboard template needed or radius & length paper or cardboard template needed 8” inside rise PROFILE WIDTH MINIMUM RADIUS 1” 2” 3” 4” 4”- 5” 8”- 10” 12”- 15” 16”- 18” 5” 6” 7” 8” 20”- 22” 24”- 26” 28”- 32” 32”- 36” MINIMUM RADIUS l NOTE l Every profile mould has limitations on how tight a radius it can be formed into. If your order includes a part that is a tight radius, check with your White River Sales Professional before writing the order.