Omnia Door Hardware

(973) 239-7272 • www. OMNIAindustries.com 57 NARROW BACKSET LOCKSETS Narrow Backset Locksets Product Data 2019 LATCHSETS & LOCKSETS 1 1 ⁄ 2 " and 2" Narrow Backset Mortise Locks Available with two backset options — 1 1 ⁄ 2 " or 2". Other backset options available. Please specify when ordering. Available for levers only. Specify right hand or left hand. Not reversible. Entry — B Shipped Standard Latchbolt by lever either side. Deadbolt by key out- side and turnpiece inside. No locking rocker switch; hubs always operable. Single Cylinder – A Latchbolt by lever either side except when outside lever is locked by the rocker switch in the front; then by key outside, lever inside. Deadbolt by key outside and turnpiece inside. Privacy – L Latchbolt by lever either side. Deadbolt by turnpiece inside and emergency key outside. Entry Double Cylinder – BAC Latchbolt by lever either side. Deadbolt by key either side. No locking rocker switch; hubs always operable. Same strike supplied with both 1 1 / 2 " & 2" b.s. locks. Extended lip strikes are available. DRAWINGS NOT TO SCALE Passage — N Latchbolt by lever either side. Made in U.S.A. Double Cylinder – AC Latchbolt by lever either side except when the outside lever is locked by the rocker switch in the front; then by key outside, lever inside. Deadbolt by key either side. Backset: Available with two backset options 1 1 ⁄ 2 " and 2". Please specify backset on order. Case: Heavy gauge plated steel. • 1 1 ⁄ 2 " b.s.: 6 1 ⁄ 16 " x 2 5 ⁄ 16 " x 3 ⁄ 4 " • 2" b.s.: 6 1 ⁄ 16 " x 2 13 ⁄ 16 " x 3 ⁄ 4 " Accommodates thru-bolted roses. Front: Adjustable armored steel front, with 8" x 1 1 ⁄ 4 " solid brass faceplate for both bodies. Finished to match trim. Latchbolt: Solid brass with 1 ⁄ 2 " x 1" x 1 ⁄ 2 " throw. Deadbolt: Solid brass with 1 ⁄ 2 " x 3 ⁄ 4 " x 1" throw. Strike: Solid brass curved lip strike. 4 7 ⁄ 8 " x 1 1 ⁄ 4 " x lip 1 1 ⁄ 4 " to center. Finished to match trim. Dust box supplied as standard. Extended lip strikes are available. Cylinder: Solid brass from bar stock. Made in USA. Schlage ® “C“ keyway supplied as a standard, with two OMNIA nickel silver keys. When applicable, cylinder collars are supplied with compression spring. Available on special order in a variety of other keyways and key combinations. Keying: Specify Keyed Alike (KA) when needed. Master / Grand / Construction Keying available at additional cost. Solid Brass Backplates 60000 Series 11 7 ⁄ 16 " x 1 3 ⁄ 4 " x 1 ⁄ 4 " proj. 63000 Series 10 1 ⁄ 8 " x 1 3 ⁄ 4 " x 3 ⁄ 8 " proj. 64000 Series 8 1 ⁄ 4 " x 2" x 1 ⁄ 4 " proj. 65000 Series 9 1 ⁄ 2 " x 1 9 ⁄ 16 " x 3 ⁄ 8 " proj.