Hardware Resources

= Low Voltage Entry (1-1/2" from left side) located on back frame • Custom lengths from 10-1/2" – 92" • 120 volt integral switch (available in Black, Grey, or White) • Custom receptacle/switch placemen t • Receptacles must be a minimum of 1-1/2 " apart (on center) • Receptacles must be a minimum of 1" from right side & 5-1/2" from left side. Knockout cannot be behind device. • Custom charges may apply — Call Design Services at 866-848-9094 for a quote, lead time, and assistance with your custom order Back Frame Cover 1½" Divider Plate NOTE: 6 " LED board is mounted in center of 10-1/2 " fixture 10-1/2" Fixture – LP10HR3ND ColorFinishTemp 1" 9-1/2" 5-1/2" 60-1/2" Fixture – LP60HR30ND ColorFinishTemp 7" 7" 7" 7" 7" 7" 11-1/2" 7" 5-1/2" 1-1/2" 48-1/2" Fixture – LP48HR24ND ColorFinishTemp 11-1/2" 9" 7" 7" 7" 7" 5-1/2" 1-1/2" 36-1/2" Fixture – LP36HR18ND ColorFinishTemp 12-1/2" 6" 6" 6" 6" 5-1/2" 1-1/2" 24-1/2" Fixture – LP24HR12ND ColorFinishTemp 10-1/2" 3" 3" 3" 5" 5-1/2" 1-1/2" 3" 5" 10-1/2" 18-1/2" Fixture – LP18HR9ND ColorFinishTemp 5-1/2" 1-1/2" 12" 8" 5-1/2" 1-1/2" 7-1/2" 7-1/2" 7-1/2" 7-1/2" 7-1/2" 7-1/2" 7-1/2" 72-1/2" Fixture – LP72HR36ND ColorFinishTemp 42-12" Fixture – LP42HR21ND ColorFinishTemp 10-3/4" 6-3/4" 5-1/2" 1-1/2" 6-1/4" 6-1/4" 6-1/4" 6-1/4" 4-1/2" 11" 6" 30-1/2" Fixture – LP30HR15ND ColorFinishTemp 5-1/2" 1-1/2" 4-1/2" 4-1/2" 12-1/2" Fixture – LP12HRM6ND ColorFinishTemp 1" 10" 5-1/2" 1 -1/2 " WITHOUT Built-in power supply – Higher light output – 6 watts per foot Lighted Power Strip RM Series Receptacle Placement (Under Cabinet Installed View) LEGEND = 15 amp receptacle available in Black (B), Grey (G), or White (W) = Divider Plate (Low Voltage) = Knock-out (1-1/2" from right side – 5-1/2" from left side) located on back frame CUSTOM OPTIONS/DETAILS Customer Service: 800.445.6404 | Design Services/Tech Support: 866.848.9094 | www.TaskLighting.com [ 439 ] Lighting & Power