Hardware Resources

800.463.0660 | www.HardwareResources.com [ 401 ] Bath Vanities Vanity Base andMirror Frame Care Before using a cleaner, read the directions on the cleaner bottle to find out whether the cleaner is safe for wood, as well as if you should put the cleaner straight on the item or if it needs to be diluted with water. Use a clean, dry cloth to wipe off the surface of your bathroom vanity or mirror frame before applying a cleaner; this will get rid of hair, dust and other loose powders before you apply the cleaner. Use a cloth or soft sponge while cleaning the vanity or mirror frame to not scratch the finish. After you have applied the cleaner, be sure you rinse off your vanity or mirror frame and dry the surface with a dry towel. TopCare Simple care and maintenance will keep your granite or marble top looking beautiful for generations to come. All granite and marble tops are pre-sealed, however we strongly recommend the consumer apply a resin based penetrating sealer at least every six (6) months. All natural stone is porous and sealing fills the pores to help prevent staining liquids from penetrating, however, daily care is necessary to maintain the quality of the stone. Wiping off the water will prevent a mineral buildup (a whitish, dull residue on the stone), especially around the faucet holes and the bowl. Do’s and Don’ts • Do clean surfaces with mild detergent or stone soap • Do thoroughly rinse and dry the surface after washing • Do blot up spills immediately • Don’t use vinegar, lemon juice or other cleaners containing acids on marble • Don’t use any oily product on granite • Don’t place hot items directly on the stone surface • Don’t place china, ceramics, silver or other objects directly on the surface as they can scratch the stone • Don’t use cleaners that contain acid such as bathroom cleaners, grout cleaners or tub and tile cleaners • Don’t use abrasive cleaners such as dry cleansers or soft cleansers • Don’t mix bleach and ammonia; this combination creates a toxic and lethal gas Mirror Care Use a glass cleaner or vinegar and water mixture. Apply the mixture on the glass and wipe dry with a dry paper towel or lint-free cloth. Hardware Resources may at its own discretion and without notice change the specifications, color, or design of any product in our catalog as well as discontinue any product in our range. Measurements shown in this catalog have a tolerance of +/- 1/8”. Hardware Resources believes in quality, integrity, and reliability. We uphold the highest standards of service and responsibility in the industry. As such, Hardware Resources warrants all Bath Vanities and Kitchen Islands and their components to be free from any defects in material and workmanship as long as the original consumer purchaser owns the products, if the original consumer purchased the products from an authorized distributor of Hardware Resources. Hardware Resources cannot guarantee the quality or condition of products from distributors who do not agree to meet our high standards, and therefore, no warranty is provided for products from unauthorized sellers. If a defect is found, Hardware Resources will send to the original purchaser a new replacement product or component at no charge. If a replacement is no longer available, Hardware Resources will offer a replacement vanity, island or component that is comparable to the original product’s purchased price or will refund to the original purchaser the current wholesale value of the vanity or component. This warranty is a warranty of replacement only. Hardware Resources specifically does not warrant removal of the product nor installation of replacement new product. This warranty does not apply when the item has been tampered with, misused, improperly installed, altered from the original deign, or damaged through abuse or accident. Finishes for all Bath Vanities and Kitchen Islands are multi-layered, created by hand. Slight variations may occur which add to the uniqueness of each item. Granite and marble countertops are manufactured of natural stone, and as a result, Hardware Resources cannot guarantee exact shading or grain of the stone. Butcher Block tops are manufactured of natural wood, and Hardware Resources cannot guarantee exact shading or grain of the wood. Naturally occurring characteristics such as variations in grain, color, and/or mineral streaks are not considered a defect in the product. In the unlikely event that a defective vanity, island or component is encountered, please contact Customer Service at 800.463.0660. Please be able to provide a brief description and photographs of the defect. Lifetime Warranty Care &Cleaning