16 BARNCRAFT® DOOR HANDLES Black Pull Handles The black handles shown on this page are made of real hand wrought iron that is durable, heavy, and complements any design theme, together with your choice of BarnCraft door and sliding hardware. As these handles are all hand-made, their size and appearance will vary slightly. All are packaged with mounting screws. The VISTA mounts flush with the face of the door, and requires a mortise pocket be cut or chiseled into the door for installation. The PROSPECT is 1/4” thick, and mounts directly on the door face, and does not require a mortise pocket. The other handles shown below extend above the face of the door, and can only be mounted on the door face away from the wall. The Vista or Prospect may be mounted on the “back” side of the door. The 12” pull handles directly below are designed to be mounted with the Vista or the Prospect on the “back” side of the door, as the screw holes for each align, but they also may be used separately (without Vista or Prospect). Refer to our BarnCraft Product & Information Guide for more detail. Vista (left, 8” tall) - HP4 Prospect (right, 8” tall) - HP26 Vista - HP4 (8” tall) shown with Metro pull The 5 pull handles at right may be used with or without the Vista pull or Prospect plate, with the 12” handle on the front of the door, and the Vista or Prospect on the back side. Concord HP24 Del Mar HP25 Metro HP20 Brooklyn HP22 Sierra HP23 The 6 pull handles below and the 3 to the left all screw directly into the front face of the door. Tucson HP13 Gila HP17 San Juan HP16 12” Pull Handles 12” Pull Handles for 8” Vista or Prospect plate mount Tucson HP1324 San Juan HP1624 Gila HP1724 24” Pull Handles Santa Fe HP1 Corona HP3 Monterey HP2 Prospect - HP26 (8” tall) shown with Metro pull
RkJQdWJsaXNoZXIy MTk1NDEz